1. Turn the screw of the balancer several times to create a little space between ring and knob.
2. Pull up the knob to release the tension, it’s best to wear a glove or use a cloth when you do this.
3. Remove the knob, coil spring, screw and washers.
4. Partly unscrew the two little screws and remove the red cover of the balancer.
5. Remove the pulley.
6. Fully unwind the cable from the pulley.
7. Place the pulley.
8. Place the red cover and screw the two little screws back.
9. Mount back the knob and spring coil, make sure that the slot of the knob fits over the edge into the hole.
10. Turn the knob counter clockwise until the ball touches the top, you now have the right tension.
11. Mount back the washer and screw.